Peristaltic Pumps

The Standard peristaltic pump is triggered by the hard-wired cooling signal from the air conditioning unit. The Standard is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive.

It can also be used on cassettes fitted with an internal lift pump. The pump can be mounted remotely as it is self-priming to a height of 3 metres and will pump 6.25 litres of water per hour against a maximum head of 12 metres.

The pump runs constantly while the air conditioning system is cooling –when the cooling switches off a 3 minute timer ensures that the condensate tray is emptied before the pump switches off. Rollers in the pump act as check valves to stop the condensate draining back into the condensate tray. The Standard pump is a peristaltic rotary type – which means that it is quiet in operation, very reliable and will run dry without fear of damage or embarrassing noise. The Standard does not suffer from corrosion or contamination problems.

Technical Specifications

• Operates on hard-wired 150-230V cooling signal
• Self-priming lifts 3 metres
• 12 metres discharge head
• Water flow rate: 6.25 ltrs per hr @ 12 metres head
• 3 minute timer overrun
• No siphoning back
• No loud sound from dry running
• Manual test switch

• Pumps water, fibrously contaminated water and air
• Pump rating: 0.2A, 230V AC
  Alternative voltages available
• Fire retardant plastics
• Inlet/outlet size: 6mm
• Push-in plug
• Wall-mounted bracket

Dimensions:
115mm(H) x 135mm(W) x 77mm(D)

The Universal peristaltic pump operates with two temperature sensors. These allow the pump to detect and be triggered by a change in air temperature, making this pump suitable for many applications.

The Universal is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive. It can also be used on cassettes fitted with an internal lift pump. The pump can be mounted remotely as it is self-priming to a height of 3 metres and will pump 6.25 litres of water per hour against a maximum head of 12 metres.

The pump runs constantly while the air conditioning system is cooling – when the cooling switches off a 3 minute timer ensures that the condensate tray is emptied before the pump switches off.

The Universal pump is a peristaltic rotary type – which means that it is quiet in operation, very reliable and will run dry without fear of damage or embarrassing noise. Unlike other pumps using either mechanical or electrical conductivity sensors, the Universal does not suffer from corrosion or contamination problems.

Technical Specifications

• Senses 5°C differential across the evaporating coil
• Only requires live/neutral supply and 2 sensors either side of the evaporating coil – one ‘air on’ and one ‘air off’
• Operates only on cooling
• Self-priming lifts 3 metres
• 12 metres discharge head
• Water flow rate: 6.25 ltrs per hr @ 12 metres head
• 3 minute timer overrun
• No siphoning back
• No loud sound from dry running

• Manual test switch
• Pumps water, fibrously contaminated water and air
• Pump rating: 0.2A, 230V AC
  Alternative voltages available
• Connecting cable: 3 metres
• Fire retardant plastics
• Inlet /outlet size: 6mm
• Push-in plug
• Wall-mounted bracket

Dimensions:
115mm(H) x 135mm(W) x 77mm(D)

The Mechanical peristaltic pump operates by using a remote reservoir with an internal float mechanism. It is available with or without a high level alarm output. The pump is designed to be mounted remotely if required and has a 3 metre (9.8ft) lead to the float switch.

Simply position the float switch in the condensate tray or fix to the drain-pipe connection (depending on chosen reservoir). Then connect the reservoir to the pump.

Technical Specifications

• Operates on a float switch
• 2 reservoir options available
• Available with an alarm option
• Self-priming lifts 3 metres
• 12 metres discharge head
• Water flow rate: 6.25 ltrs per hr @ 12 metres head
• No siphoning back
• No loud sound from dry running
• Manual test switch

• Pumps water, contaminated water & air
• Pump rating: 0.2A, 230V AC
  Alternative voltages available
• Fire retardant plastics
• Inlet/outlet size: 6mm
• Push-in plug
• Wall-mounted bracket

Dimensions:
145mm(H) x 160mm(W) x 83mm(D)

Ideal for applications where complete silence is important. The Compressor Sensor pump is triggered by a sensor, which is designed to be mounted onto the compressor in an external condenser unit.

When the air conditioning system starts up, the compressor produces a localised electromagnetic field, triggering the sensor, which in turn activates the peristaltic pump. The pump runs constantly while the compressor is operational. When the compressor switches off, a 3 minute timer ensures that the condensate tray is emptied before the pump switches off.

Rollers in the pump act as check valves to stop the condensate draining back into the condensate tray. The pump can either be fitted in the ceiling void or installed within the condenser unit (or nearby), as long as the pump and it’s plug/socket are sheltered and fully protected from any water ingress.

The pump can be mounted remotely in this way, as it is self-priming to a height of 5m and will pump 6.25L/h of water against a maximum head of 12m. The Compressor Sensor pump is a peristaltic rotary type – which means that it is quiet in operation, very reliable and will run dry without fear of damage or embarrassing noise.

Technical Specifications

• Operates on 150-230V compressor signal
• Self-priming lifts 5 metres
• 12 metres discharge head
• Water flow rate: 6.25 ltrs per hr @ 12 metres head
• 3 minute timer overrun
• No siphoning back
• No loud sound from dry running
• Manual test switch
• Pumps water, fibrously contaminated water and air

• Pump rating: 0.2A, 230V AC
• Alternative voltages available
• Fire retardant plastics
• Inlet/outlet size: 6mm
• Push-in plug
• Wall-mounted bracket
• Mains cable: 3 metres
• Sensor cable: 10 metres

Dimensions:
145mm(H) x 160mm(W) x 83mm(D)

The MK4 peristaltic pump operates using water level sensors. This allows the pump to detect and be triggered by the level of water in the condensate tray. The detector has two sensors within the head which warm up to 15°C above ambient.

When the lower sensor comes into contact with water, the heat conductivity from the sensor provides a temperature difference energising the pump. Once the level of the water has dropped below the tip of the sensor, the pump will continue until the sensor has completely dried out.

Technical Specifications

• Operates on bead contact with water
• 3 minute timer overrun Mechanical
• Self-priming lifts 3 metres
• 12 metres discharge head
• Water flow rate: 6.25 ltrs per hr @ 12 metres head
• No siphoning back
• No loud sound from dry running
• Manual test switch

• Pumps water, contaminated water & air
• Pump rating: 0.2A, 230V AC
  Alternative voltages available
• Fire retardant plastics
• Inlet/outlet size: 6mm
• Push-in plug
• Wall-mounted bracket

Dimensions:
145mm(H) x 160mm(W) x 83mm(D)